Crane Hi Intensity Hydraulic Lifters Pontiac V8 (exc. 265/301)
Normaler Preis
€158,54
inkl. MwSt zzgl. Versand
Passendes Teil nicht gefunden? Hier gehts zur Teileanfrage
Crane Cams 99382-16 Hi Intensity "Fast Bleed" hydraulische Stössel (16 Stück) für
Pontiac V8 1955-1981
287", 303", 317", 326", 347", 350", 370", 389", 400", 421", 428" & 455"
(4,7L, 5,0L, 5,2L, 5,3L, 5,7L, 6,1L, 6,4L, 6,6L, 6,9L, 7,0L & 7,5L)
Nicht für 77-81 265 & 301 Pontiac V8 passend!
Crane´s Hi Intensity hydraulic lifters produce a "variable duration effect". At lower RPMs this can reduce running duration by 6° to 10° and decrease valve lift by .020" to .030". These formerly called "fast bleed" lifters work best with a cam that requires more compression ratio than the engine actually has. They help restore vacuum, cylinder pressure and bottom-end performance. As RPM increases, Hi Intensity lifters act more like normal hydraulic lifters. At 2500 to 3000 RPM they will produce the full duration and lift of the cam.
They should be used only if the engine's compression ratio is below the minimum recommended for the cam you have chosen. These lifters can cause "low speed detonation" if compression is too high. They are slightly noisier than standard hydraulic lifters (but not as noisy as a mechanical lifters) with a maximum RPM potential of 6,500 to 7,000 RPM.
Pontiac V8 1955-1981
287", 303", 317", 326", 347", 350", 370", 389", 400", 421", 428" & 455"
(4,7L, 5,0L, 5,2L, 5,3L, 5,7L, 6,1L, 6,4L, 6,6L, 6,9L, 7,0L & 7,5L)
Nicht für 77-81 265 & 301 Pontiac V8 passend!
Crane´s Hi Intensity hydraulic lifters produce a "variable duration effect". At lower RPMs this can reduce running duration by 6° to 10° and decrease valve lift by .020" to .030". These formerly called "fast bleed" lifters work best with a cam that requires more compression ratio than the engine actually has. They help restore vacuum, cylinder pressure and bottom-end performance. As RPM increases, Hi Intensity lifters act more like normal hydraulic lifters. At 2500 to 3000 RPM they will produce the full duration and lift of the cam.
They should be used only if the engine's compression ratio is below the minimum recommended for the cam you have chosen. These lifters can cause "low speed detonation" if compression is too high. They are slightly noisier than standard hydraulic lifters (but not as noisy as a mechanical lifters) with a maximum RPM potential of 6,500 to 7,000 RPM.